Product category: PBAT+PLA BLOW FILM MATERIAL
Product description: PBAT+PLA; industrial compost, difficult to deform after bearing a load, high transparency
Main application: Garbage bags, outer packaging bags, shopping bags, trash bags, etc.
Please contact us for more product details
Products Introduction: All organic components of DEG-101A can be degraded. DEG-101A can be processed on various types of film blowing machines, printing machines, bag making machines and sealing machines. Compared with the DEG-100 series, the film material produced by DEG-101A is relatively hard, relatively difficult to deform after being loaded, and has improved transparency.
Fully biodegradable bags(customizable)
Fully biodegradable bags(customizable)
PBAT/PLA
Application: Garbage bags, outer packaging bags, shopping bags, etc.
Multiple certification guarantee
ISO9001:2015 Certification,
IATF16949:2016 Certification, etc.
Modified Blown Film Material
Density: 1.35-1.37
Characteristic: The membrane material is relatively hard, not easy to deform after load bearing, and has high transparency.
| Properties | Test Standards | Units | Typical Value |
| Appearance | NA. | NA. | Light yellow cylindrical/elliptical particles |
| Density | ISO 1183 | g/cm3 | 1.35-1.37 |
| Melt index (190℃/2.16kg) | ISO 1133 | g/10min | 11 |
| Measured film thickness | NA | mm | 0.025 |
| Film tensile strength (longitudinal) | GBT 1040.3-2006-3/ ISO 527-3：1995（2type） | MPa | 33 |
| Film tensile strength (transverse) | 26 | ||
| Film elongation at break (longitudinal) | % | 350 | |
| Film elongation at break (transverse) | 630 | ||
| The maximum load-bearing capacity of the finished bag | （460mm*（310+155）mm*0.025mm），＞24h | Kg | 8-10 |
Remark: The above laboratory test data are just for reference only; it's not a basis for quality assurance.
Caros clientes, não se preocupem com as cores dos seus produtos, a POLYROCKS possui um departamento profissional de correspondência de cores, fornecendo um serviço gratuito de correspondência de cores. Quaisquer requisitos de cor, por favor, entre em contato conosco por e-mail: sales@polyrocks.com .
O foco da POLYROCKS é fornecer serviço pré / pós-venda imediato, temos engenheiros de moldagem por injeção profissionais e engenheiros de serviço técnico para fornecer informações precisas e serviço oportuno. Qualquer dúvida ou necessidade, entre em contato conosco por e-mail: sales@polyrocks.com .
Qualquer dúvida sobre compras, bem-vindo ao entrar em contato com nosso serviço ao cliente, ajuda será fornecida por eles.
Copyright © POLYROCKS CHEMICAL CO., LTD. Todos os direitos reservados |
Mapa do site
| Distribuído por
CONTATE-NOS
FORMULÁRIO DE INQUÉRITO RÁPIDO
*Indique campos obrigatórios
